Lead Wire Parameter
Conductor material: copper, tinned copper
Conductor cross-sectional area: 0.5-300mm2
Insulation layer: EPDM
Sheath material: CR
Voltage level: low voltage, medium voltage, high voltage
Number of cores: single core, multi-core
Minimum bending radius: fixed installation greater than 6 times the outer diameter of the cable, dynamic greater than 8D
Economical and Applicable Lead Wire
Hengxun lead wire uses high-quality EPDM rubber as insulation material, which makes it have a very long service life. Compared with ordinary PVC wires, the service life is generally 3 to 5 times longer, which can greatly reduce your maintenance costs. At the same time, it can also reduce the downtime maintenance time caused by aging wires, allowing your project to run continuously and stably.
Safe And Reliable Lead Wire
Our lead wire complies with the IEC60332 flame retardant standard and is made of halogen-free and low-smoke materials, which is extremely safe. In addition, due to the characteristics of the material, it can maintain safe power output in the temperature range of -40 degrees to 90 degrees, and is not affected even in humid and oily environments. It is your safe and reliable choice.
It is recommended to use a double-layer sheath and a galvanized steel wire braided layer structure, which is wear-resistant and tensile.
The maximum traction force for laying a lead wire with a cross-sectional area of 6mm2 should be less than 800N, otherwise it is easy to cause the wire to break.
It is generally caused by ozone corrosion and long-term overload use. It is recommended to use EPDM insulation and install heat shrink tubing at key locations.
